3046P-C J-L OIL SEPARATOR CO Passenger Anodized Mercury

Review J-L OIL SEPARATOR CO For Mercury Passenger Side 3.0 Clear Anodized for MERCURY MARAUDER 2003–2004

The Mercury Marauder 3.0 Oil Separator 3046P-C is a crucial component in the engine cooling system of your Mercury Marauder model years 03-04. This anodized oil separator is designed to ensure optimal performance and longevity of your vehicle's engine.

The oil separator is engineered using high-quality 304 stainless steel material, providing excellent resistance to corrosion and rust. The anodized finish adds an extra layer of protection against environmental elements and enhances the separator's aesthetic appeal.

Measuring approximately 17.5 inches in length, 7 inches in width, and 6 inches in height, this oil separator effectively separates oil mist and water vapor from engine coolant. The efficient separation process ensures that the contaminants do not enter the engine crankcase, reducing the risk of engine damage and oil dilution.

The Mercury Marauder 3.0 Oil Separator 3046P-C features a robust design with a reliable baffle system that ensures consistent separation efficiency. The baffle system creates a vortex effect within the separator, allowing the oil and water to separate efficiently. The separator also comes with a drain plug, making it easy for you to drain the accumulated water and contaminants.

Installing the Mercury Marauder 3.0 Oil Separator 3046P-C is a straightforward process. It is designed to replace the factory oil separator and can be installed using common hand tools. The separator comes complete with all necessary hardware for installation.

In conclusion, the Mercury Marauder 3.0 Oil Separator 3046P-C is an essential upgrade for your Mercury Marauder model years 03-04. Its high-quality materials, efficient separation process, and robust design make it an excellent investment for maintaining optimal engine performance and longevity.

Pros and Cons of Buying an Oil Separator (Model 3046P-C) for a 2003-2004 Mercury Marauder 3.0 Anodized

a. Improved Engine Performance: The oil separator helps in reducing the amount of oil mist that enters the intake system, allowing for better combustion and increased horsepower.

b. Enhanced Emission System: By separating the oil from the crankcase gases, the oil separator improves the efficiency of the emission system, leading to lower exhaust emissions.

c. Longer Engine Life: The oil separator prevents oil from entering the intake system, which can cause engine damage over time.

d. Easy Installation: The oil separator is designed to fit specifically for the 2003-2004 Mercury Marauder 3.0 Anodized, making the installation process straightforward and hassle-free.

a. Cost: The oil separator can be a significant investment, especially for those on a tight budget.

b. Maintenance: While the oil separator requires minimal maintenance, it is essential to check the filter regularly to ensure it is functioning correctly.

c. Compatibility: Ensure that the oil separator is compatible with any aftermarket modifications or upgrades to the engine.

The oil separator (Model 3046P-C) is an excellent investment for those looking to improve the performance and longevity of their 2003-2004 Mercury Marauder 3.0 Anodized engine. Its ability to reduce oil mist in the intake system, enhance the emission system, and protect the engine from potential damage makes it a valuable addition. However, the cost and maintenance requirements are factors to consider before making a purchase.

If you are looking to enhance the performance and longevity of your Mercury Marauder 3.0 Anodized engine, the oil separator (Model 3046P-C) is a recommended upgrade. Weigh the pros and cons carefully, consider your budget, and ensure compatibility with any aftermarket modifications before making a purchase.

Details:

The tank holds 3 oz of fluid, while that may not sound like a lot, you should't see much Oil in your PVC system. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent Oil and an o-ring seal prevent any leaks. They then pass through a 1/2 thick 1/16th aluminum honeycomb filter where they grow every larger and fall into the bottom.

Filtering consists of a fine mesh stainless steel screen that traps Oil vapors and releases them once heavy enough to fall. This happens on all engines and is even worse with forced inducted vehicles supercharged turbocharged as crankcase pressures are increased. By the time Oil gets through filter its too heavy to be passed on into intake. Manufacturer: j l Oil Separator co, part number: 3046P-C, condition: new: j l 3.0 passenger side, clear anodized 2003-2004 Mercury Marauder during the process of venting crankcase pressure back through your intake track, large amounts Oil, in form vapors can gather/accumulate tube, manifold runners and even dilute gas, lowering its octane level.

specifications engineblocksam:

• for models: Marauder
• for makes: Mercury
• for years: 2003–2004
• brand: J-l Oil Separator Co
• mpn: 3046p-c
• type: Engine Oil Separator
• performance part: Yes
• upc: 887753829719

offer engineblocksam:

• price: $169.00
• item condition: New
• sold #: 16
• availability: in stock
• in stock #: 1
• options: ship-to-home
• started: july 22, 2025

seller engineblocksam:

• city: san leandro, california
• rating: 99.6%
• # reviews: 105886

returns engineblocksam:

• paid by: seller
• time: 30 days
• policy: returns accepted

general engineblocksam:

• category: Auto Parts > Car Truck Accessories > Engines > Blocks

payments engineblocksam:

• other
• wallet: google-pay
• credit card: mastercard

shipping engineblocksam:

• service: standard
• type: fixed
• transit: 3-7 days
• class: standard