E90E-6015-E61 FORD Engine Block Windsor 302

Review FORD 5.0l V8 Engine Block Small Windsor Bare for 302 1989–1996

The Ford E90E-6015-E61 engine block is a component of the Windsor-built 5.0L 302 V8 engine, which was used in Ford vehicles from 1989 to 1996. This engine block is a critical part of the powertrain system, providing the foundation for the cylinders and crankshaft to create the power that drives the vehicle.

The E90E-6015-E61 engine block is made of cast iron, a material known for its strength and durability. It features a bore size of 4.00 inches (101.6 mm) and a stroke length of 3.38 inches (85.8 mm), resulting in a total displacement of 302 cubic inches (5.0 liters). The block is designed to accommodate a number of different engine configurations, including those with stock or performance-enhancing modifications.

One of the defining features of this engine block is its square bore design, which allows for optimal piston-to-cylinder contact and even compression. The block also includes provisions for factory-installed accessories such as the oil pump, water pump, and timing gear.

The E90E-6015-E61 engine block is a bare, or unassembled, component. This means that it does not come with any additional parts such as pistons, connecting rods, or cylinder heads. It is intended for use by mechanics or engine builders who are assembling the engine from scratch or performing extensive repairs.

It's important to note that while this engine block is compatible with the 5.0L 302 V8 engine used in Ford vehicles from 1989 to 1996, it may require additional components or modifications depending on the specific application. Always consult with a qualified mechanic or engine builder before attempting to install this engine block in your vehicle to ensure a proper fit and optimal performance.

The Ford Windsor 5.0L 302 V8 engine block (part number: E90E-6015-E61) was produced between 1989 and 1996 for various Ford and Lincoln vehicles. This engine is known for its durability and power, but like any automotive component, it comes with its advantages and disadvantages.

1. Power: The 5.0L V8 engine delivers impressive power and torque, making it an excellent choice for those seeking a high-performance engine.

2. Durability: The Windsor engine block is renowned for its robustness and longevity. Many have clocked over 200,000 miles with regular maintenance.

3. Availability: These engines are quite common and can be found in various salvage yards and online marketplaces, making them accessible to a wide audience.

4. Affordability: Compared to newer engines, used Windsor blocks are relatively inexpensive.

1. Emissions: These engines do not meet modern emission standards and may require modifications to be used in newer vehicles.

2. Fuel efficiency: The V8 engine is not known for its fuel efficiency, and those looking for better gas mileage may want to consider a smaller engine or a more modern powertrain.

3. Maintenance: The engine may require more frequent maintenance due to its age and design. Older engines generally have more moving parts that can wear out over time.

4. Electronic fuel injection (EFI): Some of these engines came with EFI systems, which can be more complex and expensive to maintain compared to carbureted engines.

In conclusion, the Ford Windsor 5.0L 302 V8 engine block (E90E-6015-E61) is an excellent choice for those seeking power and durability in an older vehicle. Its availability and affordability make it an attractive option for engine swaps and restorations. However, potential buyers should be aware of the engine's emissions issues and the need for regular maintenance.

If you're looking for a powerful and durable engine for an older vehicle, the Ford Windsor 5.0L 302 V8 engine block (E90E-6015-E61) is a solid choice. Be prepared for the potential costs of emissions modifications and regular maintenance. Thoroughly inspect the engine block before purchasing to ensure it's in good condition. If you're concerned about emissions or fuel efficiency, consider alternative engines or modern powertrains that better suit your needs.

Details:

Camshaft provision: factory provisioned for roller lifters. Oe service number: f1pz-6010-c superseded by f1pz-6010-d/e. It is sold as-is for parts or repair. For reliable ltl service.

To minimize exposure, service in a well-ventilated area and wash hands after handling. Notice: all fluids have been drained. Technical specifications casting number: E90E-6015-E61 e9 1989 design cycle. Listing product overview this is a genuine factory Ford 5.0l 302 CID small block windsor bare engine block, casting number E90E-6015-E61.

155 lbs bare block only, items included bare engine with 2 main caps only.

specifications engineblocksam:

• for models: 302
• for years: 1989–1996
• brand: Ford
• mpn: E90e-6015-e61
• items included: Bare Engine Block With 2 Main Caps Only
• material: Cast Iron
• vintage part: Yes
• california prop 65 warning: Warning, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. To Minimize Exposure, Service In A Well-ventilated Area And Wash Hands After Handling. For More Information, Visit The Official P65warnings Website.
• type: Engine Block
• ipn: E7te-6015-aa
• oe/oem part number: F1pz-6010-c
• finish: Unfinished
• country of origin: United States
• item weight: 200 Lbs

shipping engineblocksam:

• service: flat rate freight
• class: freight
• type: fixed

offer engineblocksam:

• in stock #: 1
• started: april 10, 2026
• availability: in stock
• options: ship-to-home
• sold #: 13
• best offers: true
• price: $199.99
• item condition: Used

payments engineblocksam:

• other
• wallet: google-pay
• credit card: diners-club

returns engineblocksam:

• paid by: seller
• policy: returns accepted
• time: 30 days

general engineblocksam:

• category: Auto Parts > Car Truck Accessories > Engines > Blocks

seller engineblocksam:

• # reviews: 24
• rating: 100.0%
• city: marion, iowa