9702 EDELBROCK Intake Valve

Review EDELBROCK Intake Valve Guide

The Edelbrock 9702 Performer RPM Air Gap Intake Manifold is a high-performance intake solution designed to deliver optimal airflow and power enhancement for small-block Chevrolet and GMC engines. This intake manifold is engineered with a unique RPM (Raised Plenum) design, which increases velocity and volume of air charges entering the engine, resulting in increased horsepower and torque.

The 9702 intake manifold features an open element, mass airflow design that doesn't use a restrictive filter or MAF sensor, providing better response and drivability compared to factory and aftermarket intake systems using a MAF or mass airflow sensor. With no MAF or filter to replace, you'll save time and money on maintenance.

1. Enhanced durability and strength

2. Explosion-proof design to prevent warping or failure under high engine vacuum situations

3. Precise engine tuning, as there's no need to accommodate MAF sensor calibration or filter cleaning

Extensive port matching and radiusing from W.E.M.TM (World's Finest Engineering) technology ensure seamless intake port transition and uniform airflow distribution among cylinders for consistent combustion. The 9702 intake manifold's open design also eliminates the need for gasket sealing, resulting in a simple, leak-free installation process.

1. Remove the factory intake manifold.

2. Install the included gaskets to seal the heads and cylinder block.

3. Install the 9702 intake manifold onto the engine.

4. Connect the fuel and vacuum lines, and nonelectric chokes (if applicable) to the intake manifold.

5. Reassemble the vehicle following the recommended procedure for your application.

Embrace the power potential hidden within your small-block Chevrolet or GMC engine by upgrading to the Edelbrock 9702 Performer RPM Air Gap Intake Manifold. Make every drive an exhilarating experience!

Edelbrock 9702 Performer Series Intake Manifold: pros and cons, and conclusion.

The Edelbrock 9702 Performer Series Intake Manifold is a popular aftermarket intake manifold for small-block Chevy engines. Here are some pros and cons to help you understand its advantages and drawbacks before making a purchase.

1. Increased Power: The Edelbrock intake manifold is designed to provide better flow and performance than the stock intake. It can help increase horsepower and torque.

2. Improved Air-Fuel Mixture: The intake design allows for better air-fuel mixture, enhancing combustion efficiency for improved engine performance.

3. Easy Installation: The intake manifold comes with pre-assembled bolts and gaskets for a hassle-free installation process.

4. Better Fit and Finish: The Edelbrock intake manifold provides a clean, polished appearance, and its casting is generally considered to be of high quality.

5. Suitability for Performance Upgrades: The intake manifold is an excellent choice for those planning further performance upgrades, such as carburetor or fuel injection systems.

1. Cost: The Edelbrock intake manifold can be more expensive than stock manifolds, making it a significant investment for some.

2. Potential Clearance Issues: Depending on the engine configuration, clearance issues may arise due to the increased height of the intake manifold. This could be addressed with the use of spacers or identifying a manifold with improved clearance.

3. Larger Throttle Bodies: The use of larger throttle bodies or carburetors may be necessary to take full advantage of the manifold's performance benefits, which could result in additional costs and modifications.

The Edelbrock 9702 Performer Series Intake Manifold can be a worthy investment for those seeking better engine performance from their small-block Chevy engine. While it comes with some cost and potential clearance concerns, its advantages in power, air-fuel mixture, ease of installation, and compatibility with performance upgrades may outweigh the downsides for many enthusiasts. Ultimately, it is recommended that potential buyers assess their specific application, budget, and performance goals before making a purchase.

For those looking to unlock additional power from their small-block Chevy engine and are prepared for any installation or cost considerations, the Edelbrock 9702 Performer Series Intake Manifold is a recommended choice. However, if cost is a major concern or clearance issues are a known issue with specific engine configurations, it may be prudent to explore alternative intake manifold options before making a decision. Always ensure proper research and consultation with automotive professionals to make an informed purchasing decision.

Details:

Intake valve guide 9702 by Edelbrock. Order from the comfort of your home or office. Edelbrock carry everything needed to complete the job. Designed utilizing the latest technology, this product by Edelbrock features premium quality and will perform better than advertised.

Features: the finest quality at a great price. Specifications: valve guide material: manganese bronze.

specifications engineblocksam:

• brand: Edelbrock
• mpn: 9702
• part type: Intake Valve Guide
• product type: Racing Engines Components
• upc: 085347097029
• fitment type: Unit Type Specific
• product subtype: Racing Camshafts, Valvetrain Components
• product details: Performance Engine Valve Guide
• engine version: Boss 302 Ford Small Block V8

general engineblocksam:

• category: Auto Parts > Car Truck Accessories > Engines > Blocks

returns engineblocksam:

• policy: returns accepted
• paid by: seller
• time: 30 days

shipping engineblocksam:

• transit: 2-7 days
• carrier: fedex
• type: calculated
• class: standard
• service: fedex ground or fedex home delivery

payments engineblocksam:

• credit card: visa
• wallet: apple-pay
• other

offer engineblocksam:

• started: january 16, 2025
• options: ship-to-home
• price: $24.95
• item condition: New
• availability: in stock
• sold #: 20

seller engineblocksam:

• # reviews: 121456
• city: miami, florida
• rating: 96.6%