56318 PORSCHE Engine

Review PORSCHE 356 B/c Engine Case Dated 03/62

The Porsche 56318 356 B/C engine is a true automotive marvel, a testament to the engineering brilliance of Porsche's past. This engine, produced in March 1962, is a significant part of the classic 356 B/C model's history.

This air-cooled, flat-four engine boasts a displacement of 1,582 cc (98.3 cubic inches) and a bore and stroke measurement of 81.0 mm x 71.0 mm (3.19 inches x 2.8 inches). The engine's compression ratio is an impressive 9.5:1, delivering ample power and torque for a vehicle of its era.

The engine's cylinder heads are equipped with two Solex 32 PICT-10 carburetors, enabling a smooth and responsive fuel delivery system. The intake valves are actuated by a single overhead camshaft, while the exhaust valves are operated by a separate camshaft located at the rear of the engine. This design, known as the "pushrod" configuration, optimizes power delivery and efficiency.

The Porsche 56318 356 B/C engine is also distinguished by its six-volt electrical system, which was common in cars of the 1960s. The engine produces approximately 70 horsepower at 5,400 rpm, providing the iconic 356 B/C with a spirited and engaging driving experience.

The engine's cooling system is air-cooled, with a simple yet effective design that relies on an efficient radiator, fan, and airflow to maintain optimal operating temperatures. The engine block and cylinder heads are constructed from lightweight aluminum alloy, contributing to the 356 B/C's renowned agility and performance.

The Porsche 56318 356 B/C engine is more than just a powertrain; it's a piece of automotive history. Its unique design, impressive power output, and iconic status among Porsche enthusiasts make it a highly sought-after component for restorations and custom builds. Whether you're an experienced mechanic or a passionate collector, the Porsche 56318 356 B/C engine is an essential addition to any automotive endeavor.

The Porsche 356 B/C engine, specifically model number 56318 produced in March 1962, is a desirable collectible item for Porsche enthusiasts. Here are some pros and cons that might help you decide if purchasing this engine is the right choice for you:

1. Historical Significance: The Porsche 356 B/C engine is a piece of automotive history. It represents a significant improvement over the earlier 356 A models with its larger displacement and improved performance.

2. Potential for Performance: With a displacement of 1600cc, this engine has the potential for good power output when properly tuned and maintained.

3. Rarity: This specific engine, being a March 1962 production, is relatively rare, making it a desirable collectible.

4. Investment Potential: The value of classic car engines, especially those from desirable manufacturers like Porsche, can appreciate significantly over time.

5. Hands-on Project: For those who enjoy working on cars and engines, this project could be an exciting and rewarding experience.

1. Cost: The cost of purchasing and restoring this engine can be substantial. You'll need to factor in the cost of acquisition, shipping, rebuilding, and any necessary parts.

2. Complexity: Rebuilding and maintaining a classic engine like the 356 B/C can be a complex and time-consuming process. It may require specialized knowledge and tools.

3. Availability of Parts: Some parts for the 356 B/C engine may be difficult to find, adding to the cost and complexity of the project.

4. Time Commitment: Restoring an engine to proper working order can take a considerable amount of time, depending on your level of expertise and the resources available to you.

5. Risk of Damage: During the rebuilding process, there is always a risk of damaging the engine, which could increase the cost of the project.

The Porsche 356 B/C engine, model number 56318, produced in March 1962, is an appealing collectible item for Porsche enthusiasts. It offers historical significance, potential performance improvements, rarity, investment potential, and a hands-on project experience. However, it also comes with significant costs, complexity, availability of parts, time commitment, and the risk of damage.

Based on the information provided, it is essential to carefully consider your personal circumstances, expertise, and resources before deciding to purchase this engine. If you are passionate about classic cars, have the necessary skills and resources, and are prepared for the financial investment and time commitment, then this engine could be an exciting and rewarding project for you. Otherwise, it may be wiser to consider other options.

Details:

The quoted shipping prices are within the 48 states only. This listing is for: Porsche 356 b/c engine case dated 03/62 # 56318, - #56318 616 / 7 696, used. Sold as is, no return due to the high shipping cost. Please see pictures for details.

specifications engineblocksam:

• brand: Porsche
• mpn: 56318
• part type: Engine Case
• location: Ka-004

general engineblocksam:

• category: Auto Parts > Car Truck Accessories > Engines > Blocks

returns engineblocksam:

• policy: no returns

offer engineblocksam:

• sold #: 15
• availability: in stock
• in stock #: 3
• started: june 24, 2025
• prices: $407.21–$1199.00
• item condition:
  • For parts or not working
  • New
• options: ship-to-home

shipping engineblocksam:

• type: fixed
• service: standard
• class: standard
• transit: 3-8 days

payments engineblocksam:

• other
• credit card: diners-club
• wallet: paypal

seller engineblocksam:

• # reviews: 29758
• city: ontario, california
• rating: 99.8%