4892758AA FIAT Crankshaft Crank Thrust Bearing 500

Review FIAT Oem Crankshaft Crank-thrust Bearing for 500 2012–2017

The Fiat 4892758AA crankshaft crank-thrust bearing is an essential component of the engine's crankshaft assembly in select Fiat 500 models produced between 2012 and 2017. This bearing plays a vital role in transmitting the engine's rotational forces to the transmission while minimizing lateral forces and maintaining proper engine alignment.

The crank-thrust bearing is a circular component, typically made of high-strength steel with an inner and outer race, as well as a set of rollers or balls, which are separated by a thin layer of lubricant. The inner race is attached to the crankshaft, while the outer race is pressed into the engine block. The rollers or balls are designed to roll smoothly between the races, reducing friction and wear.

This specific Fiat part, the 4892758AA, is engineered to meet the exacting standards of Fiat vehicles. Its precise dimensions and materials ensure a perfect fit and optimal performance. Over time, however, the crank-thrust bearing can wear out due to normal engine operation, resulting in unwanted noise, vibration, or even engine damage.

When it comes time to replace the crank-thrust bearing, using an OEM (Original Equipment Manufacturer) part like the Fiat 4892758AA is crucial. An OEM part guarantees a proper fit, high-quality materials, and the performance that your Fiat 500 deserves. Installing a non-OEM part could lead to complications, such as misalignment, which could negatively impact the performance and longevity of your engine.

To install the crank-thrust bearing, you will typically need to remove the engine's crankshaft, carefully extract the old bearing, and press the new bearing into place using the appropriate tools. The process can be complex and may require professional assistance. If you're unsure about the installation process, it's always best to consult with a certified mechanic.

In conclusion, the Fiat 4892758AA 12-17 500 crankshaft crank-thrust bearing is a crucial component in the engine's crankshaft assembly. Its precise dimensions, high-quality materials, and perfect fit ensure optimal engine performance. When it's time for replacement, using an OEM part like the Fiat 4892758AA is essential for maintaining the performance and longevity of your Fiat 500.

Fiat 500 Crankshaft Crank-Thrust Bearing (Part Number: Fiat 4892758AA 12-17) - Pros, Cons, and Conclusion

The Fiat 500 crankshaft crank-thrust bearing (part number: Fiat 4892758AA 12-17) is a crucial component in the engine's powertrain. This article presents an in-depth analysis of the pros, cons, and a final recommendation regarding the purchase of this specific crankshaft crank-thrust bearing.

1. OEM Quality: This part is a genuine Fiat product, ensuring a perfect fit and optimal performance.

2. Enhanced Engine Life: A worn-out crankshaft crank-thrust bearing can lead to significant engine damage. Replacing it with a new one helps maintain engine health and longevity.

3. Reduced Vibration: A faulty crankshaft crank-thrust bearing can cause excessive engine vibration, negatively impacting driving comfort. A new bearing reduces or eliminates these vibrations.

4. Smoother Engine Operation: A well-functioning crankshaft crank-thrust bearing ensures smooth engine operation, leading to a more enjoyable driving experience.

1. Cost: Replacing this component can be relatively expensive, especially for those on a tight budget.

2. Labor Costs: Installing the new crankshaft crank-thrust bearing requires professional help, adding to the overall cost.

3. Time Consuming: The repair process can be time-consuming, with the vehicle likely being out of commission for a few days.

Considering the pros and cons, it is evident that purchasing a Fiat 500 crankshaft crank-thrust bearing (Fiat 4892758AA 12-17) is a necessary investment for the longevity and optimal performance of your Fiat 500. While the cost might be a concern, the benefits of improved engine health, reduced vibration, and smoother engine operation make this investment worthwhile.

If you are experiencing issues related to crankshaft crank-thrust bearing malfunctions, such as excessive engine vibration or rough engine operation, it is recommended that you replace the old part with a new Fiat genuine crankshaft crank-thrust bearing (Fiat 4892758AA 12-17). This investment will not only address the current issue but also contribute to the long-term health and performance of your Fiat 500 engine.

Details:

Add details like I tried to install this part, and it didn't fit. Genuine new oem parts. Found a better price. Just didn't like it.

If you do, our experts will hand-verify compatibility before shipping. Changed my mind. High-value items are usually sent with signature-delivery requirements. Request a return.

4892758aa: Fiat oem 12-17 500 crankshaft crank-thrust bearing 4892758AA. See below for instructions.

specifications engineblocksam:

• for models: 500
• for years: 2012–2017
• brand: Fiat
• mpn: 4892758aa
• part type: Bearing Crankshaft Crank
• genuine oem: Yes
• manufacturer warranty: 1 Year
• category 2: Crankshaft Bearings
• fitment type: Direct Replacement
• fitment footnotes: Color-blue;vendor;
• weight: 0.09 Lb
• length: 3.622 In
• item name: Thrust Bearing
• height: 1.811 In
• part ref on diagram: Only Part Reference 30 On The Diagram Is Included
• width: 2.5 In
• category 1: Engine
• color: Blue

payments engineblocksam:

• other
• wallet: apple-pay
• credit card: visa

general engineblocksam:

• category: Auto Parts > Car Truck Accessories > Engines > Blocks

seller engineblocksam:

• city: garland, texas
• rating: 96.4%
• # reviews: 13242

shipping engineblocksam:

• transit: 16-27 days
• class: standard
• service: standard
• type: fixed

returns engineblocksam:

• policy: returns accepted
• paid by: buyer
• time: 30 days

offer engineblocksam:

• options: ship-to-home
• sold #: 22
• availability: in stock
• prices: $22.15–$41.28
• item condition:
  • New
  • Used
• started: april 8, 2025